Heating Solutions
Most Recent
 
Read More
25. September 2016

Using Z-Weather in the Zipabox

The multi-sensor Z-Weather, which besides anemometer also measures many other weather- and environment data, can be perfectly integrated into the Zipabox. …and this is how it works! As mentioned at the beginning, Z-Weather is much more than just a wind sensor, among others, it also measures:

Wind speed Relative humidity Brightness Air pressure Dew point Air temperature Solar and wind energy

 

On our siio blog, there have been a few articles about Z-Weather in the early past, for instance how to integrate it into Devolo and Daniel developed a script for the HC2. Other than that, there was an extensive test for the launch on [...]

380
 
Read More
22. September 2016

Filling the Weather Display of the HomeCenter 2 with your own Values

In this article we are going to present you a virtual device, with whom you can change the weather display on your Fibaro HomeCenter 2 by own values (for instance caused by the values of a netatmo outside-module or the data of the Z-Weather). Further information below.

Let us start at the beginning: The API of the yahoo-weather service experienced some changes in the early past, due to them, no updates of the weather display were implemented anymore. The display and the triggering of scenes, which access the weather data (Small LUA Scripts Part 2: storm warning) has not been functioning from that moment on. With the update to firmware version 4.082 Beta, Fibaro changed the [...]

1241
 
Read More
2. September 2016

For hobby meteorologists: Z-Weather on the Devolo-Home-Control

The Z-Weather multi-sensor also functions with the Devolo-Home-Control System. Unlike Fibaro and Co, data concerning weather can even be graphed in diagrams and this is how it all looks in the WebUI:

We already talked about the energy-self-sufficient weather sensor Z-Weather multiple times: Z-Weather in the test, Script for Z-Weather under Fibaro HC2, Netatmo vs. Z-Weather, … and so on.

Thanks to solar energy, this manages to go without additional power supply and provides diverse data about the weather to the user. It is now possible to integrate the weather sensor into the Devolo-Home-Control Center and to use data concerning weather for the performing of [...]

129
 
Read More
28. March 2016

Displaying the netatmo ombrometer & anemometer data in the Fibaro HC2

After we have already integrated the netatmo anemometer and the netatmo welcome into the Fibaro HomeCenter 2, the ombrometer cannot be missing either. How to do it can be read below.

2354
News
 
10 year smoke sensor
The Z-Wave system also gets a 10-year functioning smoke sensor
 
Z-Weather – Z-Wave presents energy self-sufficient anemometer
Tests
 
The Z-Wave Thermostat – Test: Devolo / Danfoss vs. Eurotronic Comet-Z
 
Almond+ (Plus) the touchscreen smart home router with Zigbee & Z-Wave in test
 
Belkin WeMo LED lights vs. Philips Hue
Reviews
 
The innovation netatmo anemometer tested against Z-Weather
 
Fibaro HCL – Part 2: Home Center Lite Web UI & Apps
 
Bild: © crissxcross
Fibaro HCL vs. Homematic – Part 1: Fibaro HCL unboxing
 
Piper Camera – All-in-one smart home alarm system with Z-Wave